Tips From the Moving Business Pros: How to Move a Pinball Device



With pinball making a big renewal across the nation, Gentle Giant wishes to make certain that these traditional, lovely machines remain damage-free while being transported. Oh, and we desire individuals moving them to be safe, too.

Initially look, pinball machines can appear daunting to move due to the fact that of their weight, size, and fragility. The good news is, our competent Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

Most of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State machines.

Later devices have hinges and use a latching system to keep the headbox upright. There might also be two bolts inside as included safety, in case the latch is broken or mistakenly un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball machines, you require to get rid of the headbox rear access panel to access to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however with time the key may have been lost. Rather often, there is a screw keeping this panel in place.

When within, remove the bolts and unplug the big adapters that have wiring decreasing into the maker. You may want to identify these connectors to put them back in the right area, however they should be different sizes, making it tough to plug back improperly.

You can now remove the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in location.
Early Solid State Pinballs

For early Solid State Pinballs, you will require to get rid of the back glass. There is a lock located on the headbox in one of 3 areas: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.

When opened, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), then pull it out from the bottom.

Open up the back box light panel by lifting the latch situated on either the left-hand side or right-hand side. The panel can now swing out to you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise the light panel in order to swing it open.

Now that you are within, you can remove the bolts, and any plugs that have wires going down into the maker. You might wish to label these plugs to put them back in the best area. You might not require to remove the plugs, as the wiring ought to be long enough to permit the headbox to be folded down.

At this moment, you can lock up the lamp panel and replace the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Using the supplied key, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a simple setup and requires no tools.

You're done if you can now Source fold down the head box onto the cabinet. Make certain you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in location.

You need to get inside if you can not fold the head box down. There is a lock situated at the top of the back glass this content in the. Utilize the provided secret to unlock, and remove the back glass by lifting it up from the bottom, and after that pulling it out from the bottom.

Next, you will need to eliminate the screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.

Pinball Maker legs are kept in place by eight bolts. They will be either 5/8 inch or 9/16 inch heads. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be removed, and the legs will come off.

These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this is the case, you will need to open up the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise up the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You should now have access to any nuts that may have been used. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.

Be sure to mark or remember which legs are for the front and back, as they will be adjusted differently to fit.
Packing the Pinball.

You are now prepared to transfer your pinball device. Before you pack it, ensure you eliminate the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball utilizing a van or SUV, it may be simpler to remove the legs just prior to loading the machine. Grab a friend to assist and have one of you supporting the pinball, while the other gets rid of the front legs.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop all of a sudden!

For Electro-Mechanical pinball devices, you require to eliminate the headbox rear access panel to gain access to the bolts and browse this site plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to packing the machine. Grab a friend to assist and have one of you supporting the pinball, while the other gets rid of the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *